#Monolith Zero

Learning from my plastic V2 Z-joint mistake and the lead screw clearance difficulties with the toolhead, here's what's gonna change on the Z-setup:…

zruncho is at the VICE 2025 event with his working M0 prototype. If you’re attending, don’t miss the chance to see the printer in action…

I've decided to post second one right after the first for easier comparison…

The 3628 Heater mount is finally released!…

Here's the first set of graphs from my M0 prototype after a day of tinkering. Currently, the parts designed for SLM or laser cutting are printed in very wet ASA/ABS CF, so I wasn't really expecting anything usable here…

After careful airflow considerations, 3628 fans were selected, and the design was changed to accommodate them…

It took me more than a couple of evenings to get this thing running again, despite using the same Pi and Octopus Pro. I was expecting to plug everything in the same way, change the config from Cartesian to CoreXY, and continue where I left off a year ago, but it turned out to be harder than that…

Yesterday, I decided to build the complete printer with FDM parts, not just the XY gantry, to get a better understanding of the whole experience…

I wanted to touch on the Z-assembly of the M0 for quite a while now, so here it is…

As a side quest, I've been toying with the idea of a simple 100W 24V chamber heater solution to easily reach temperatures similar to my V2, which is around 90°C…